Frequently Asked Questions

The Launch Pad Diving Board is Manufactured with industry-leading 2-inch T-6061 Aircraft Aluminum, and Stainless Steel Hardware making it the strongest and safest diving board in the industry.

To install the Launch Pad Diving Board your boat needs to meet the following requirements: The boat needs to be a minimum of 17 feet long and 7 feet wide. The floor needs to be 3/4 inch marine grade plywood or 3/4 inch fiberglass. The floor must be in excellent condition with no signs of rot or flexing.

Watch the installation video and read the entire owner manual before using –  https://h2omarine.com/instructions/

Placement of your Launch Pad Diving Board is extremely important. Mount the diving board in the most stable parts of the boat. Most boat owners will find that the best place to mount their Launch Pad Diving Board is on a rear swim deck or platform, or at the side door of their boat. Other options include bow mounts, rear mounting or side mounting. Our preferred location is a stern location because that is usually where the ladder is mounted and provides for a quick and easy swim to board the boat. Here are our recommended mounting locations

* SIDE DOOR MOUNTING – Side Door mounting provides stability from boat movement and is free of protruding obstructions.

* REAR PLATFORM / SWIM PLATFORM MOUNTING – If your boat is equipped with a platform at the stern, mounting on the Port side is preferred as the grab handle mounts on the left, keeping divers away from the motor.

* FRONT/BOW MOUNTING – Bow mounting is permitted on vessels that DO NOT have any objects protruding from the front of the vessel.

The Launch Pad Diving Board is shipped via UPS Ground

The Launch Pad Diving Board is shipped for free via UPS Ground to the Lower 48 United States. We do not ship to Alaska, Hawaii, Puerto Rico, or Internationally.

The Launch Pad Diving Board is simple to assemble and install. Most people can do the complete installation in less than 2 hours.

Here is a link to the installation instructions and installation video – https://h2omarine.com/instructions/

The Launch Pad Diving Board footprint is 31’ X 17.5’ – https://h2omarine.com/wp-content/uploads/2020/12/Mounting_Plate_Dimensions_WEB-scaled.jpg

The Launch Pad Diving Board dimensions can be found here – https://h2omarine.com/wp-content/uploads/2020/12/Diving_Board_Dimensions_WEB.jpg

The Launch Pad Diving Board will work on any boat with a solid flat surface. The most popular styles include pontoon boats, houseboats, cabin cruisers, and motor yachts.

Yes, the Launch Pad Diving Board will easily mount onto your deep water dock. Only to be used on docks that are in at least 15 feet of water or more.

Yes, with the simple pull of 2 pins the board folds down flat against the boat wall allowing you to dock or pull up to the gas pump without any interference from the board.

The Launch Pad Diving Board has incredible bounce because of its patent-pending dual spring system.

Removing the diving board from the boat is easy and requires no tools. Simply unscrew the 4 eye bolts by hand and set the diving board out of the boat.

The Diving board easily breaks down for storage with the use of only the supplied allen key. The diving board breaks down easily in just a couple of minutes. – https://h2omarine.com/instructions/

If your question is not answered here, please use the contact form at the bottom of this page to ask us your question. We strive to keep our Frequently Asked Questions section up to date and as informative as possible.